Monroe AW Hydraulic Oil

$43.54 – $2,202.63

The five grades are premium-quality anti-wear hydraulic oils with excellent stability, designed to meet the most stringent requirements of most all the major manufacturers and users of hydraulic equipment. These oils are characterized by providing rust protection, low deposit formation, rapid release of entrained air, oxidation resistance, low pour points, and good antifoam properties. They contain an effective anti-wear agent that helps reduce wear in highspeed, high-pressure vane and gear pumps.

SKU: N/A Category:

Description

ISO Grade 10 15 22 32 46 68 100
Viscosity, cSt At 40 C 10.98 15.5 22.0 30.2 44.2 66.2 93.8
Viscosity, cSt At 100 C 3.3 3.5 4.3 5.2 6.6 8.5 10.6
Viscosity Index 100 100 100 100 98 95 95
Flash Point, (COC) Deg F 370 380 395 405 425 445 460
Pour Point, Deg F -35 -35 -25 -20 -15 -0
Neut. No., ASTM D 974 0.55 0.55 0.55 0.55 0.55 0.55 0.55
Gravity, API @ 60 F 33.0 31.5 31.0 30.0 29.0 28.7 28.3
Oxidation Life, ASTM D 943, Hrs +6000 +6000 +6000 +6000 +6000 +6000 +5500
Rust Test, ASTM D-665 A & B No Rust No Rust No Rust No Rust No Rust No Rust No Rust
Demulsibility, ASTM D-1401 Pass Pass Pass Pass Pass Pass Pass
**Dielectric Strength, ASTM D 877 30 KV+ 30 KV+ 30 KV+ 30 KV+ 30 KV+ 30 KV+ ——–

**Application ISO Grades 10, 15, 22, 32, 46, & 68 meet dielectric strength test results described in ASTM D-877 @ 30KV+ providing customer storage and containment are free of moisture under all conditions.

Additional information

ISO Grade

10, 15, 22, 32, 46, 68, 100
Size

Pail, Drum, Tote

Applications

Recommended for vane, gear, and piston-type pumps where operating pressures may exceed 3000 psi. These anti-wear hydraulic oils are very effective in reducing vane and gear pump wear and greatly extend the life of systems operating at high loads, speeds, and temperatures. In a clean dry system, typical value** for ASTM D-877, \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"Dielectric Breakdown Voltage of Insulating Liquids\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\" will exceed 30 Kilovolts. These hydraulic oils meet performance requirements of DIN 51524 HLP, Denison HF-0, Eaton-Vickers I-286-S, M-2950-S and Cincinnati Lamb Landis P-68, P69, and P-70. **Application ISO Grades 10, 15, 22, 32, 46, & 68 meet dielectric strength test results described in ASTM D-877 @ 30KV+ providing customer storage and containment are free of moisture under all conditions.
Internet Marketing Solution & Design by Cazbah