ASTRO-CUT SYN GL

ASTRO-CUT SYN GL

Product & Safety Datasheets

Overview

ASTRO-CUT SYN GL is a heavy-duty oil-free synthetic cutting and grinding fluid concentrate designed to offer good lubricity as well as excellent corrosion control on machinery and workpieces while providing a long sump life. This product may be used on a variety of metals, including steels, cast iron and aluminum; in operations ranging from grinding to turning to milling.

Applications

ASTRO-CUT SYN GL has been designed for machining most metals except magnesium. Excellent on cast iron. This product may also be used for grinding: Blanchard, diamond wheel, belt, disk, etc. NOTE: Since this product is completely oil-free, it may be used in most coolant mist units for machining and grinding operations.

Features Benefits

· Excellent Corrosion Inhibition
· Nitrite-Free
· Chlorine-Free
· Phenol-Free
· Very Low Foam – Excellent on High Pressure or High Speed Machining
· Excellent Cooling for Ability to Maintain Close Tolerances
· Tolerant of Hard Water
· Resistant to Damage from

Mixing

Concentration, %4%5%6%7%8%9%10%
Ratio1:251:201:171:141:121:111:10
Refractometer1.41.72.02.42.73.13.4
When mixing coolant, it is best to use an automatic proportioner which accurately and thoroughly mixes coolant. To maintain proper concentration, make-up should be added at one-half of the desired concentration.

Typical Properties

Appearance-ConcentrateColorless liquid
Appearance- DilutionTransparent Colorless
Residual FilmSoft, soluble
pH @ 20:19.5 ± 0.2
Specific Gravity @ 60°F1.04± 0.03
Lbs/Gallon8.68 ± 0.1
Flash point, PMCCNone