You are here
Home » ASTRO-CUT MICRO A HP
ASTRO-CUT MICRO A HP
ASTRO-CUT MICRO A HP is a heavy duty mineral oil based BIOSTABLE micro-emulsion concentrate designed for the machining and grinding of virtually all metals except magnesium. ASTRO-CUT MICRO A HP has exceptional foam control for high pressure operations and is formulated without the use of chlorine. This product offers a long sump life and a high degree of emulsion stability, even in hard water. ASTRO-CUT MICRO A HP is not recommended for use on Magnesium.
ASTRO-CUT MICRO A HP is designed for use in high and low pressure metal removal operations such as all CNC milling, turning, drilling, tapping, grinding and sawing.
|Milling, Drilling, Turning||5%||1:20||4.1|
|Centerless, ID, OD, Surface Grinding||4%||1:25||3.3|
|Tapping, Sawing, Reaming||10%||1:10||8.2|
When mixing coolant, it is best to use an automatic proportioner which accurately and thoroughly mixes coolant. To maintain recommended concentration, make-up or top-off should be added at one-half of the desired concentration. Never add concentrate directly to the machine; this could cause inverted emulsions.
|Appearance- Dilution||Translucent Amber|
|Residual Film||Soft, fluid|
|pH @ 20:1||9.1 ± 0.2|
|Specific Gravity @ 60°F||1.00 ± 0.03|
|Lbs/Gallon||8.34 ± 0.1|
|Total Chlorine, wt %||None|
|Flash point, PMCC||None|